Home ›› Data Acquisition & Control ›› PCI Express Card

AD-PCIE-1760

8-ch Relay and 8-ch Isolated Digital Input PCI Express Card with 10-ch Counter/Timer

Features

  • 8 opto-isolated digital input channels
  • 8 relay actuator output channels
  • 2 opto-isolated PWM outputs
  • LED indicators to show activated relays
  • Jumper selectable dry contact/wet contact input signals
  • Up event counters for DI
  • Programmable digital filter function for DI
  • Pattern match interrupt function for DI
  • "Change of state" interrupt function for DI
  • BoardID switch

Specification

 PCIE-1760-AE
Counter/TimerChannels8
Compatibility5 V/TTL
Isolation Protection2,500 VDC
Max. Input Frequency500 Hz
PWM Channels2
Resolution16 bits
GeneralBusPCI Express V1.0
Dimensions168 x 100 mm (6.6" x 3.9")
Humidity (Storage)5 ~ 95% RH, non-condensing (see IEC 68-2-3)
I/O Connectors1 x DB37
Power ConsumptionTypical: 5 V @ 450 mA, Max.: 5 V @ 850 mA
Temperature (Operating)0 ~ 60°C (32 ~ 140° F)
Temperature (Storage)-20 ~ 70°C (-4 ~ 158°F)
Isolated Digital InputChannels8 (Sink)
Input Resistance2 kW 1/4 W
Input VoltageLogic 0: 1.0 V max., Logic 1: 4.5 V min. (12 V max.)
Interrupt Capable Ch.8 (IDI0 ~ IDI7)
Isolation Protection2,500 VDC
Opto-Isolator Response25 ?s
Relay OutputChannels8
Contact Rating1 A @ 125 VAC, 2 A @ 30 VDC
Max. Switching Current2A
Max. Switching Power125 VA, 60 W
Max. Switching Voltage250 VAC, 220 VDC
Operate/Release Timemax. 5 / 3.5 ms
Relay Type2 x Form C, and 6 x Form A
ResistanceContact: 50 mW max., Insulation: 100 MW min. @ 500 VDC
PCIE-1760 relay actuator and isolated digital input card is a PC add-on card for the PCI Express bus. It meets the PCI Express standard Rev. 1.0. It provides 8 opto-isolated digital inputs with isolation protection of 2,500 VDC for collecting digital inputs in noisy environments, 8 relay actuators that can be used as a on/off control devices or small power switches, and 2 isolated PWM (Pulse Width Modulation) outputs for custom applications.

For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface with other devices when no voltage is present in the external circuit.

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my