Home ›› Serial & Wireless Connectivity ›› Device Server / Terminal Server

PortServer® TS P MEI

PortServer TS P MEI makes it easy to connect RS-232/422/485 serial devices

Features

  • Supports powered Ethernet and powered serial
  • 1, 2 or 4 RS-232/422/485 serial ports

Specification

Specifications PortServer® TS 1 P MEI PortServer® TS 2 P MEI PortServer® TS 4 P MEI
Features
Management HTTP/HTTPS, CLI, SNMP (read/write), Digi Port Authority-Remote management diagnostics and auto-discovery tool
Protocols UDP/TCP, PPP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
Software Device-initiated patented RealPort® with encryption COM port redirector
Security SSHv2
Status LEDs Link, Power
Operating Systems AIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6, Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows Server® 2008, Windows Vista®
Note: TCP/UPD Socket Services are operating system independent
Dimensions
(L x W x D)
5.25 in x 3.33 in x 0.95 in (13.34 cm x 8.46 cm x 2.42 cm)
Weight 2.25 oz (64.00 g)
Other 802.3af powered Ethernet (mid- and end-span); Full modem and hardware flow control, Modem emulation, Port buffering, RJ-45/DB-9F crossover cable included for optional serial configuration
Interfaces
Serial
Ports 1 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD 2 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
 
4 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
 
Ethernet
Ports 1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half duplex
Power Requirements
Power Input 9-30VDC
Power Supply (included) North America: 12VDC/.5A max out; 120VAC in (wall mount) International: 12VDC/.5A max out; 100-240VAC in (small brick)
Power Consumption Typical: 4 W; Max: 6 W
Surge Protection 4 kV burst (EFT) per EN61000-4-4, 2 kV surge per EN61000-4-5
Powered Ethernet Ethernet Power, IEEE 802.3af compliant, pins 4/5(+) and 7/8(-); 4 kV burst (EFT) per 1000-4-4; 2 kV surge per EN61000-4-5
Serial Power Input DC input connector, 9-30VDC, 525 mA max; Serial Port 1, Pin 1 (RI), 9-30VDC, 525 mA max
Serial Power Output Available on all serial ports; 1 watt available power with selectable voltage level; Pin 1 (RI) 5VDC up to 200 mA max; Pin 9 (DTR) 9VDC up to 100 mA max
Environmental
Operating Temperature 0° C to 50° C (32° F to 122° F)
Relative Humidity 5% to 90% (non-condensing)
Ethernet Isolation 1500VAC min per IEEE802.3/ANSI X3.263
Serial Port Protection (ESD) +15 kV air 6 AP and +8 kV contact discharge per IEC 100-4-2
Approvals
Safety  UL 1950, CSA 22.2 No. 950
Emissions/Immunity CE, FCC Part 15 (Class A), EN55024, EN55022 Class A

serial-server-PortServer-TS-P-MEI
PortServer TS P MEI makes it easy to connect RS-232/422/485 serial devices to an IP network. By supporting versatile powering options like power over Ethernet and serial port power, this serial server can adapt to many applications where traditional power options are not available.

Power over Ethernet (802.3af, mid- and end-span support) makes it possible to run just one Ethernet cable to the device server for both power and communications. The serial port power feature enables PortServer TS P MEI to power a device over serial using Ring Indicator (RI) or DTR pins. Power over Ethernet can be used in conjunction with a conventional power supply to provide redundant power capability to the device.

Available in two- and four-port versions, PortServer TS P MEI delivers universal, high performance multiport serial-to- Ethernet connectivity. It is ideal for applications requiring COM ports, serial tunneling, or where TCP/UDP Socket functionality is needed.

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my