Home ›› Serial & Wireless Connectivity ›› Device Server / Terminal Server

ConnectPort® TS 8/16

Terminal servers with dual IPv4/IPv6 stack


  • Dual IPv4/IPv6 stack
  • 8 or 16 serial ports with Tx/Rx LEDs
  • Patented RealPort® technology for COM/TTY port control/ management
  • SSL/TLS and SSHv2 for added security
  • Easy configuration and management through web browser or CLI


Platform ConnectPort® TS 8 ConnectPort® TS 16
Management HTTP/HTTPS, CLI or Telnet; Optional secure enterprise management via Digi Connectware Manager
Protocols IPv4/IPv6, UDP/TCP, DHCP, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
Software Device-initiated patented RealPort COM port redirector and RFC 2217; Python scripting; Custom development environment
Status LEDs Serial: Tx/Rx; Ethernet: Link/Activity
Dimensions (L x W x H) 4.15 in x 7.7 in x 1.3 in (10.5 cm x 19.6 cm x 3.3 cm) 17 in x 6.95 in x 1.62 in (43.18 cm x 17.65 cm x 4.1 cm)
Weight 4.1 lb (1.86 kg) 5 lb (2.3 kg)
Security SSL, SSL/TLS, SSHv2, FIPS 197 (serial ports), SNMPv2, PPP
Ports 8 RS-232/422/485 serial ports (software selectable) 16 RS-232 serial ports
Throughput Up to 230 Kbps
Signal Support TXD, RXD, RTS, CTS, DTR, DSR, DCD
Physical Layer 10/100 Base-T
Data Rate 10/100 Mbps
Mode Full or Half duplex
Ports 2 ports @ .5A max per port
Power Input 9-30 VDC @ .8A max 100-240 VAC, 50-60 Hz, 0.4A
Power Supply 12VDC power supply for 0° C to 60° C (32° F to 140° F) with locking barrel connector included; Extended temperature power supply available Open frame power supply: 100 to 250 VAC in 12 VDC out
Power Consumption Typical: 6 W (500mA @ 12Vdc)
Max: 12 W (1A @ 12 Vdc)
Typical: 8 W (660mA @ 12 Vdc)
Max: 15 W (1.25A @ 12 Vdc)
Surge Protection 4 kV burst (EFT) per-4-4; 2 kV surge per EN61000-4 1 kV burst (EFT) per EN61000-4-4; 2 kV surge transient per
Operating Temperature 0° C to 60° C (32° F to 140° F) 0° C to 55° C (32° F to 131° F)
Storage Temperature -40° C to 85° C (-40° F to 185° F)
Relative Humidity 5 to 95% (non-condensing)
Ethernet Isolation 1500VAC min per IEEE 802.3/ABSU X 3.263
Serial Port Protection (ESD) +8 kV air gap and +4 kV contact discharge per IEC 1000-4-2
Safety UL60950-1, EN/IEC 60950-1, CAN/CSA C22.2 No. 60950, CUL60950-1-03
Emissions/Immunity FCC Part 15 Subpart B Class A, EN55024, EN55022, Class B, AS/NZS CUSOR 22, EN61000-3-2 ,3

ConnectPort TS 8/16 serial servers provide secure, easy RS-232 or RS-232/422/485 serial-to-Ethernet integration of virtually any device into wired Ethernet networks. They are ideal for use in a wide variety of demanding applications such as automation, robotics control, centralized device monitoring and management, data acquisition, and point-of-sale applications requiring COM/TTY ports, serial tunnelling or TCP/ UDP functionality.

Enhanced access control, management and configuration capabilities support key security requirements for critical infrastructure and distributed systems. A built-in Python environment enables application development and customization at the device level, including full device CONNECTPORT® TS 8/16 connection control, data manipulation and event based actions.

The ConnectPort TS implements Digi’s patented RealPort COM port redirection software which provides local serial port functionality. The ConnectPort supports both hostinitiated and device-initiated RealPort connection modes. SSH, SSL, TCP and UDP connectivity are also supported to each port.

Management of the device is possible through Digi Remote Manager, web services, CLI and SNMP connectivity with mass configuration and customization tools available to preconfigure devices prior to deployment.

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my