Home ›› Serial & Wireless Connectivity ›› Gateway

ConnectPort® X2

XBee® to IP gateways


  • Ethernet gateways supporting XBee ZigBee and other XBee RF modules
  • Easy development Python scripting
  • Multiple form factors and configuration options
  • Secure, anywhere management using Device Cloud


Model ConnectPort X2 Industrial
Management HTTP/HTTPS web interface, Password access control, IP service port control, Optional secure enterprise management via Device Cloud
Protocols UDP/TCP, DHCP, SNMPv1
Total Memory 8 MB Flash, 16 MB RAM
LEDs Ethernet status, Power, ZigBee link/activity
Security SSL tunnels
(L x W x H)
5.50 in x 2.75 in x 1.13 in (13.9 cm x 7.0 cm x 2.9 cm);
0.44 lb (0.20 kg)
Wireless Interfaces
XBee Module Options 802.15.4, ZigBee, DigiMesh 2.4, 900HP, XSC, 868
Antenna Port RPSMA female
Ports ZigBee, 802.15.4, DigiMesh (XBee-PRO 900HP)
Physical Layer 10/100Base-T
Data Rate and Mode 10/100 Mbps (auto-sensing); Full or half duplex (auto-sensing)
Power Requirements
Power Input 9-30 VDC
Power Supply 12 VDC power supply for 0° C to 60° C (32° F to 140° F) with locking barrel connector included;
Extended temperature power supply available separately
Power Consumption Idle: 1.2 W, Max: 3.4 W
Surge Protection (w/included power supply) 4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4
Operating Temperature -30° C to +70° C (-22° F to +158° F)
Relative Humidity 5% to 95% (non-condensing)
Ethernet Isolation 1500 VAC min per IEEE802.3/ANSI X3.263
Regulatory Approvals
Safety EN60950
Emissions/Immunity CE, FCC Part 15 (Class A)

ConnectPort X2 is a small XBee to Ethernet gateway that provides low-cost IP networking of XBee-enabled devices and sensor networks. Featuring a simple development environment, ConnectPort X2 enables custom applications to run locally while interfacing across existing Ethernet networks for WAN connectivity to a centralized server.

ConnectPort X2 gateways benefit from the enhanced management capabilities offered by Digi Device Cloud. This web-based device management system enables remote access and control of your Digi gateways.

ConnectPort X2 products feature rapid M2M-specific application development on the industry standard Python scripting engine. Digi ESP™ provides an IDE featuring device detection, debugging, compiling and downloading of Python code to Digi gateways.

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my