Home ›› Industrial Communication ›› Wireless Access Point/Router

O-IAP-W420+/W422+

Industrial outdoor IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X) PoE P.D., IP-67 grade

Features

  • High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • High throughput > 80Mbps
  • Far Distance Air Connectivity up to 7 KM (IAP-W420+)
  • Support X-Roaming < 100 ms
  • Support AP/Client/Repeater/AP-Client Mode
  • Wireless connecting status monitoring
  • HTTPs protocol supported for
  • Event Warning by Syslog, Email, SNMP Trap
  • Rigid IP-67 housing design
  • Pole-mount enabled

Specification

O-IAP-W420+

O-IAP-W422+

Physical Ports    
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
WLAN interface    

Operating Mode

AP/Client/Repeater/AP-Client

Antenna Connector

Built-in 10dBi panel antenna

2 x External N-type antenna connector

Radio Frequency Type

OFDM

Modulation

IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM

Frequency Band

America / FCC :  2.412~2.462 GHz (11 channels )
Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels )

Transmission Rate

IEEE802.11b: 11, 5.5, 2, 1 Mbps;
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE 802.11n: up to 300Mbps

Transmit Power

800mw Max.

Receiver Sensitivity

-96dBi

Encryption Security

WEP: (64-bit ,128-bit key supported)
WPA/WPA2 :802.11i(WEP and AES encryption)
WPAPSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption

Wireless Security

SSID broadcast disable

Protocol Support    

Protocol

ARP,BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)

LED Indicators    

Power indicator

1 x LED,
Green On: Power(PoE) is on and functioning Normally.

10/100Base-T(X) RJ45 port indicator

2 x LED,
Green On: Port Link / Act, Blinking: data transmission

WLAN LED

3 x LED,
Green for WLAN Strength: 1<30%, 2<60%, 3<90%
Power    

Input power

48VDC from P.o.E

Power consumption (Typ.)

9 Watts

Physical Characteristic    
Enclosure IP-67
Dimension (W x D x H) 162(W)x 101.5(D)x 58(H) mm
(6.38x 4.0x 2.28 inch.)
162(W)x 102(D)x 48(H) mm
(6.38x 4.02x 1.89 inch.)
Weight (g) 680 g
Environmental    
Storage Temperature -30 to 85°C (-22 to 185°F)
Operating Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 100% Non-condensing
Regulatory approvals    
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 3 years

O-IAP-W420+ / W422+ is a reliable IP-67 outdoor IEEE 802.11 b/g/n WLAN Access Point with 1 PoE P.D. Ethernet port. It can be configured to operate in AP/Client/Repeater/AP-Client mode using WEB interface via LAN port or WLAN interface and is specifically designed for the toughest industrial environments.

In combination with its IP-67 design and the superb management functionality, O-IAP-W420+ / W422+ provides a waterproof, dust-tight connection. O-IAP-W420+ provides high power output of 500mw and high throughput up to 80Mbps to satisfy far distance connection. It provides two N-type connectors, which can install any N-type antennas to extend communication distance. In addition, IAP-W420+ / W422+ also provides P.D. feature which is fully compliant with IEEE802.3af PoE P.D. specification to save the layout cost of power line.

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my