Home ›› Industrial Communication ›› CompactPCI Ethernet Switch

O-CPGS-9080-C

3U CompactPCI EN50155 8-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) in CompactPCI socket

Features

  • EN50155 compliant Ethernet switch for rolling stock application
  • Supports 3U and 4HP CompactPCI form factor and hot swapping
  • PICMG 2.0 specification compatible
  • Support 8x10/100/1000Base-T(X) ports in CompactPCI sockets
  • Support Jumbo frame up to 9.6K Bytes
  • Supports O-Ring (recovery time < 30ms over 250 units of connection), MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • Supports IPV6 new internet protocol version
  • Support Modbus TCP protocol
  • Support IEEE 802.3az Energy-Efficient Ethernet technology
  • Supports IP-based bandwidth management
  • Supports application-based QoS management
  • Supports Device Binding security function
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management
  • Support ACL, TACACS+ and 802.1x User Authentication for security
  • Multiple notification for warning of unexpected event
  • Windows utility (Open-Vision) support centralized management and configurable by Web-based interface, Telnet and Console (CLI)

Specification

Physical Ports
10/100/1000Base-T(X) Ports in Auto MDI/MDIX 8-port with CompactPCI Interface (PICMG 2.0 compatible)
Technology  
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching latency: 7 us
Switching bandwidth: 24Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Security Feature Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network Redundancy O-Ring
Open-Ring
O-Chain
MRP
STP/RSTP/MSTP
Warning / Monitoring System Syslog server / client to record and view events 
Include SMTP for event warning notification via email 
Event selection support
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable.  115200bps, 8, N, 1
LED Indicators  
Power Indicator Green : Power LED x 1
Fault Indicator Amber : Indicates unexpected event occurred
R.M. Indicator Green : indicate system operated in O-Ring Master mode
O-Ring Indicator Green : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act
Power  
Power Input CompactPCI bus powerd (12 VDC)
Power Consumption (Typ.) 6.2 Watts
Overload Current Protection Present
Physical Characteristics  
Dimensions (W x D x H) 20 (W) x 209 (D) x 130.7 (H)mm (0.79 x 8.23 x 5.15 inch)
Weight (g) 224 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

CompactPCI series Ethernet switches are designed for industrial applications, such as factory automation, transportation and railway applications. O-CPGS-9080-C is CompactPCI managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports, fully compliant with EN50155 requirement.

The switch supports Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) which help to protect your applications from network interruptions or temporary malfunctions with its fast recovery technology.

CPGS-9080-C supports wide operating temperature from -40 oC to 70 oC which can fulfill most of the demanding operation environment. Except the Web-based interface, Telnet and console (CLI) configuration, CPGS-9080-C can also be managed centralized and conveniently by Open-Vision. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my