Home ›› Embedded PC ›› 3.5" Embedded Board

AS-SBC-310

3.5" SBC supports BGA Haswell MCP for Intel® Core i5/Celeron (Haswell ULT)

Features

  • BGA Haswell MCP for Intel® Core i5/Celeron (Haswell ULT)
  • Integrated Intel® HD Graphics Built-in Visuals
  • Supports DDR3L 1333/1600MHz, 1 x SO-DIMM, up to 8GB system memory
  • 2 x HDMI, 1 x 24 bit Dual Channel LVDS co-lay with eDP
  • 4 x USB 3.0, 4 x USB 2.0,2 x SATA3
  • 1 x mini-PCIe, 1x mSATA,
  • Gigabit LAN : 1 x RTL8111G x 1, 1 x
  • Gigabit LAN : 1 x RTL8111G x 1, 1 x Intel® I218V(2890U SKU)
  • 1 x TPM Header

Specification

Anewtech-AS-SBC-310
 Form Factor
Dimensions- 3.5" SBC (5.8-in x 4.0-in)/ ( 146 x 102 mm)
 Processor System
CPU- BGA type for Intel® Core i5-4300/Celeron 2980U mobile
- processor (Haswell ULT MCP )Default 2980U Dual core MCP
Core Number- (By CPU, Max 4)
Max Speed- ( By CPU)
L2 Cache- ( By CPU)
Chipset- ( By CPU)
BIOS- UEFI
 Expansion Slot
PCI- 0
Mini-PCIe- 1 (Half Size) + 1 (Full Size ) shared with mSATA
mSATA- 1 (Full Size ) shared with SATA2
PCIe- 0
CFast Card Socket- 0
 Memory
Technology- Single Channel DDR3L 1333/1600 MHz SDRAM
Max.- 8GB
Socket- 1 x SO-DIMM
 Graphics
Controller- Intel® HD Graphics (By CPU)
VRAM- Shared Memory
VGA- 0
LVDS- 1 co-lay with eDP
HDMI- Supports HDMI 1.4a, supported with Level Shift, resolution up to 4096x2304 (1x HDMI)
DVI- 0
DisplayPort- 0
MultiDisplay- Yes(Three Display)
 Ethernet
Ethernet- 10/100/1000 Mbps
Controller- GbE LAN1:RTL8111G , LAN2: Intel® I218LM (4300U SKU)
- GbE LAN1:RTL8111G , LAN2: Intel® I218V (2980U SKU)
Connector- 2 x RJ 45
 SATA
Max Data Transfer Rate- SATA3 (6.0Gb/S)
 Rear I/O
VGA- 0
DVI- 0
HDMI- 2
DisplayPort- 0
Ethernet- 2
USB- 4 x USB 3.0
Audio- 0
Serial- 0
eSATA- 0
PS2- 0
 Internal Connector
USB- 4 (2 x USB Header 2.54mm pitch)
LVDS / inverter- 24 bit dual channel LVDS co-lay with eDP
VGA- 0
Serial- 4 ( 2 RS-232/422/485, 2 RS-232)
SATA- 2 x SATA3 (6.0Gb/s)
mPCIe- 1
Parallel- 0
mSATA- 1(shared)
IrDA- 0
GPIO 8-bit- 4 x GPI + 4 x GPO
SATA PWR Output Con- 1
Speaker Header- 1
 Watchdog Timer
Output- Output from super I/O to drag RESETCON#
Interval- 256 Segments, 0,1,2…255 Sec/Min
 Power Requirements
Input PWR- DC 9-36 input
Power On- AT/ATX Supported AT : Directly PWR on as power input ready
- ATX : Press button to PWR on after power input ready
 Environment
Temperature- 0ºC – 60ºC

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my