Home ›› Industrial Communication ›› Rackmount Switch

O-RGS-9168GCP

Industrial 24-port rack mount managed Gigabit Ethernet switch with 16xGigabit combo ports and 8x100/1000Base-X, SFP socket

Features

  • Support O-Ring(recovery time < 30ms) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 *MRP (Media Redundancy Protocol) function (by request only)
  • Support IPV6 new internet protocol version
  • Support Modbus TCP protocol
  • Support IEEE 802.3az Energy-Efficient Ethernet technology
  • Provided HTTPS/SSH protocol to enhance network security
  • Support SMTP client and NTP server
  • Support IP-based bandwidth management
  • Support application-based QoS management
  • Support Device Binding security function
  • Support DOS/DDOS auto prevention
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
  • Support ACL and 802.1x User Authentication for security
  • Support 10K Bytes Jumbo Frame
  • SFP socket support DDM function
  • Multiple notification for warning of unexpected event
  • Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration

Specification

Model O-RGS-9168GCP O-RGS-9168GCP-E
Physical Ports  

Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports

16

100/1000Base-X with SFP port

8
Technology  
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX 
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 8K
Priority Queues 8
Processing Store-and-Forward
Switch Properties

Switching latency: 7 ?s
Switching bandwidth: 128Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define

Jumbo frame Up to 10K Bytes
Security Features

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Single 802.1x and Multiple 802.1x
MAC -based authentication
MAC address limit
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
IP source guard

Software Features

IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging 
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
DHCP Relay
Modbus TCP
SMTP Client
NTP server

Network Redundancy

O-Ring
O-Chain
*note MRP
MSTP (RSTP/STP compatible)

RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1
LED Indicators  
Power Indicator (PWR) Green : Power indicator Green LED x 3 : Power-1/2/3 indicator
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)
 
Green: Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault) Amber : Indicates unexpected event occurred
10/100/1000Base-T(X) RJ45 Port Indicator

Green for 1000Mbps Link/Act indicator.
Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps

1000Base-X SFP Port Indicator Green for port Link/Act.
Fault Contact  
Relay N/A

Relay output to carry capacity of 1A at 24VDC

Power  
Power input  100~240VAC with power socket

100 ~ 240VAC with power socket and dual 48VDC (36 ~ 72VDC) at 6-pin terminal block

Power Consumption (Typ.) 28.2 Watts 28.2 Watts
Overload Current Protection NOT Present Present with terminal block
Reverse Polarity Protection Present Present
Physical Characteristics  
Enclosure 19 inches rack mountable
Dimensions (W x D x H) 431 (W) x 342 (D) x 44 (H) mm(16.97 x 13.46 x 1.73 inch)
Weight (g) 4117 g 4437 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature

-40 to 75°C (-40 to 167°F )

Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my