Home ›› Industrial Communication ›› Rackmount Switch

O-RGS-P9160FXM1

Industrial IEC 61850-3 16-port modular rack mount managed Ethernet switch with 16x100Base-FX and 1 switch module slot

Features

  • Designed for power substation application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
  • Supports O-Ring(recovery time < 30ms) andMSTP(RSTP/STP compatible) for Ethernet Redundancy
  • O-Chain allow multiple redundant network rings
  • *note Supportsstandard IEC 62439-2 MRP (Media Redundancy Protocol) function (by request only)
  • Provided one switch module slot for extend switch port
  • Supports IEEE 1588v2 clock Synchronization
  • Supports IPV6 new internet protocol version
  • Supports Modbus TCP protocol
  • Supports IEEE 802.3az Energy-Efficient Ethernet technology
  • Provided HTTPS/SSH protocol to enhance network security
  • Supports SMTP client and NTP server protocol
  • Supports IP-based bandwidth management
  • Supports application-based QoS management
  • Supports Device Binding security function

Specification

Model O-RGS-P9160GCM1-HV O-RGS-P9160GFM1-HV O-RGS-P9160FXM1-HV
Physical Ports    
Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports 16 - -
100Base-FX Ports - - 16
1000Base-FX Ports - 16 -
Modular Slot 1 1 1
Technology    
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 8k
Packet Buffer 32Mbits
Flash Memory 128Mbits
DRAM Size 1Gbits
Jumbo frame  Up to 10K Bytes
Priority Queues 8
Processing Store-and-Forward
Switch Properties

Switching latency: 7 us
Switching bandwidth: 48Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range: 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define

Security Features

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Single 802.1x and Multiple 802.1x
MAC-based authentication
MAC address limit
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
IP source guard

Software Features

IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/ Relay
Modbus TCP
NTP server
SMTP Client

Network Redundancy

O-Ring
O-Chain
*note MRP
Fast Recovery
MSTP (RSTP/STP compatible)

RS-232 Serial Console Port

RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1

LED Indicators    
System Ready Indicator (PWR) Green : Indicates that the system ready.  The LED is blinking when the system is upgrading firmware
Power Indicator (PWR1 / PWR2) Green : Power LED x 2
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)

Green : Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken.

Fault Indicator (Fault) Amber : Indicate unexpected event occurred

Reset To Default Running Indicator (DEF)

Green : System resets to default configuration

Supervisor Login Indicator (RMT)

Green : System is accessed remotely
Fault contact    
Relay Relay output to carry capacity of 1A at 24VDC
Power  
Power Input Dual 100~240VAC / 100~370VDC power inputs at terminal block
Power Consumption (Typ.) TBD TBD TBD
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics   
Enclosure 19 inches rack mountable
Dimensions (W x D x H) 440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inch)
Weight (g) 4,823g 4,560g 4,560g
Environmental    
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals   
Power Automation IEC 61850-3, IEEE 1613 (pending)
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my