Home ›› Serial & Wireless Connectivity ›› Wireless Sensor and Camera

XBee-PRO® ZigBee Wall Router

Plug-In Router Expands the Reach of ZigBee® Networks


  • Plugs into a standard power outlet for easy deployment
  • Extends signal strength and range of an XBee ZigBee mesh network
  • Creates additional network pathways for more reliable mesh networking
  • Small form factor for unobtrusive deployment
  • Integrated light and temperature sensors


RF Data Rate 250 Kbps
Indoor/Urban Range Up to 300 ft (90 m)/200 ft (60 m) Int'l variants
Outdoor/RF Line-of-Sight Range Up to 1 mile (1.6 km)/2500 ft (750 m) Int'l variants
Transmit Power 50 mW (+17 dBm)/10mW (+10 dBm) Int'l variants
Receiver Sensitivity (1% PER) -102 dBm
Interfaces Network interoperable with ZigBee PRO Feature Set devices
Frequency Band 2.4 GHz (ISM)
LEDs Power: Solid when external power is supplied
Associate: Blinks when unit is connected and associated to an RF Network
Push Button Device reset, configuration reset to factory defaults, identification/commissioning mode
Antenna Options Internal
Locking Mechanism Unit secures to power outlet using center outlet screw (U.S. only)
Integrated Temperature & Light Sensor
Temperature Sensor Range: -20° C to +70° C (-4° F to +158° F) Accuracy: +/- 2° C
Ambient Light Sensor Range of spectral bandwidth: 360 to 970 nm (similar to human eye)
Wavelength of peak sensitivity: 570 nm
Dimensions (L x W x H) 2.87 in x 1.97 in x 1.37 in (7.30 cm x 5.00 cm x 3.50 cm)
Weight 2.50 oz (70.87 g)
Power Input Universal AC input (85VAC to 265VAC)
Environment (Temperature/Lux) 0° C to +70° C (32° F to +158° F; sub 1200 lux)
Relative Humidity 5% to 95% (non-condensing)
Regulatory Approvals
IC (Canada) Yes
CE/ETSI (Europe) Yes, Int'l variant
C-TICK (Australia) Yes
Telec (Japan) Yes, Int'l variant

XBee wall router is a small extender used to create or expand a ZigBee network, allowing other ZigBee enabled devices to seamlessly communicate with each other. The wall router simply plugs into a standard power outlet for quick and easy deployment. Once deployed, the router acts as a mesh network routing node, expanding the range and adding redundancy to a wireless network.

Additionally, environmental sensors included on the XBee wall router allow ConnectPort® X gateway users to monitor temperature and light conditions throughout the deployment area.

Built upon the extended range XBee-PRO ZigBee module, the XBee wall router is fully interoperable with other XBee ZB devices, including XBee modules, adapters, sensors and gateways. XBee products are part of Digi's Drop-in Networking family of solutions, offering users seamless wireless communication between devices. XBee adaptors deliver wireless connectivity to electronic devices in wired networks. XBee sensors provide real-time environmental information from the deployment area. ConnectPort X gateways enable users to access and configure remote devices in a network.

Have Questions? Call +603 7887 6820 or email sales@anewtech.com.my