O-IGMC-111GPB-LFP
1GE to 1G SFP Gigabit Media Converter
- Supports 1 port 100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X
- Support Ethernet to SFP port signal conversion
- Ethernet port supports full/half duplex operation
- SFP port support full-duplex operation
- Supports store and forward transmission
- Provided DIP-Switch to setting SFP speed
- High reliability and rigid IP-30 housing
- DIN-Rail and wall mounting enabled
- Support Jumbo Frame up to 10K Bytes
- Support LFP (Link Fault Pass-through) function
Datasheet
Product Specification
| Power | |
| Power consumption (Typ.) | 3.6 Watts |
| Power Input | Dual 12~48 VDC voltage power input at 4-pin terminal block |
| Overload current protection | Present |
| Reverse polarity protection | Present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimensions (mm) | 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inches) |
| Weight (g) | 190g |
| LED Indicators | |
| Power Indicator (Power) | Green : Power LED x 2 |
| 10/100Base-T(X) RJ45 Port Indicator | Green for Link/Act /nSpeed LED– Green for 1000Mbps,Off-light for 100/10Mbps |
| Technology | |
| Ethernet Standards | IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X |
| Processing | Store-and-Forward |
| Environmental | |
| Storage Temperature | -40 to 85℃ (-40 to 185℉) |
| Operating Temperature | -40 to 75℃ |
| Operating Humidity | 5% to 95% Non-condensing |
O-IGMC-111GPB-LFP is a cost-effective solution for the conversion between 100/1000Base-T(X) and 100/1000Base-X interface, it allows you to extend communication distance by optical fiber. IGMC-111GPB-LFP supports MDI/MDIX auto detection, so you don’t need to use crossover wires. O-IGMC-111GPB with wide operating temperature range from -40 ~ 70℃ and accepts a wide voltage range from dual 12 ~ 48 VDC power inputs, so it is suitable for harsh operating environments.