Digi IX10

Rugged, reliable, cost-effective connectivity for critical industrial applications

Anewtech-Systems-Cellular-Router-Enterprise-Router-Digi-IX10-Digi-International
  • Compact and economical cellular routing platform with industrial feature set
  • Redundant connectivity with dual SIMs and Digi SureLink®
  • Global bands and single part number to simplify global distribution, deployment and management
  • Built-in Digi TrustFence® for device security, device identity and data privacy
  • Digi Remote Manager® platform for easy setup, mass configuration and out-of-band management
  • Ethernet port and single RJ-45 serial port (RS-232/485)
Datasheet
Product Specification
Anewtech-Systems-Cellular-Router-Enterprise-Router-Digi-IX10-digi-international
CELLULAR
LTE (G4)LTE Cat 4: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41   
3G: B1, B2, B4, B5, B6, B8, B19   
2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz
CONNECTORS(2) 50 Ω SMA (center pin: female)
SIM SLOTS(2) Mini-SIM (2FF)
SIM SECURITYBehind SIM cover, secured with screw (#1 Phillips)
SOFTWARE AND MANAGEMENT
REMOTE MANAGEMENTDigi Remote Manager® ; SNMP v2/v3 (user installed/managed)
LOCAL MANAGEMENTWebUI (HTTP/HTTPS); CLI (Telnet, SSH)
MANAGEMENT / TROUBLESHOOTING TOOLSFTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with syslog and SMTP client; NTP/SNTP; Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute
ETHERNET
PORTS(1) RJ-45; 10/100 Mbps (auto-sensing)
SERIAL
PORTS(1) RJ-45 10-pin (10P10C); RS-232 /485; software selectable   
- RS-232 DTE (RXD, TXD, RTS, CTS, DTR, DCD, DSR, RI)   
- RS-485 (TX/RX+; RX/TX-); half-duplex
PHYSICAL
DIMENSIONS (L x W x H)118 mm x 88 mm x 35 mm
WEIGHT0.39 kg
STATUS LEDsPower, Internet, SIM 1, SIM 2, SIM fail, LTE, signal strength (5)
ENCLOSUREGlass-filled polyphenylene sulphide (PPS) / IP30
POWER REQUIREMENTS
POWER INPUT9 - 30 VDC, 1.0 A maximum
POWER CONSUMPTION2.5 W typical (idle); 6 W typical (peak Tx/Rx)
ENVIRONMENTAL
OPERATING TEMPERATURE-40° C to 70° C ; device performance may be impacted above 50° C
RELATIVE HUMIDITY5% to 95% (non-condensing)
APPROVALS
SAFETYIEC62368-1, CB, EN62311
ENVIRONMENTALROHS3
EMISSIONS / IMMUNITYCE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32
WARRANTY

Anewtech Digi-IX10 Digi International Industrial Router Enterprise 5G RouterDigi IX10 is a full-featured cellular router built for trouble-free reliability over a long service life. Its flexible power and connectivity options make it a versatile and cost-effective choice for industrial, digital signage, ATMs, lottery terminals, kiosks and other unattended retail applications that need to provide secure transactions.

Digi IX10 features a RJ-45 serial port supporting both RS-232 and RS-485, as well as built-in dual SIMs for redundant connection. It is capable of operating independently on public LTE networks, with features to assist in network control and management, such as VLAN support, load balancing between cellular and Ethernet WANs, dual APNs and configurable APN search. Digi IX10 also offers low-touch and no-touch provisioning.

Gain critical insights into your deployed devices and manage your network with Digi Remote Manager® — the command center for your deployment. Digi Remote Manager (Digi RM) is a cloud-based solution that facilitates easy setup, mass configuration, maintenance and support for hundreds or even thousands of remote Digi devices. Digi RM empowers you to evaluate, update and configure your Digi enterprise products, while providing easy visibility into the health of your network.

 
Ordering Information
Part Number

Digi IX10 — LTE Cat 4 Global 
 

  • Global LTE with 3G/2G fallback
  • Ethernet
  • RS-232/485
  • Dual SIMs
  • Accessories not included
IX10-00G4