Digi IX20

Compact and economical cellular routing platform with industrial feature set

Anewtech-Systems-Cellular-Router-Enterprise-Router-Digi-IX20-Digi-International
  • Compact and economical cellular routing platform with industrial feature set
  • Redundant connectivity with dual SIMs and Digi SureLink®
  • Global bands and single part number to simplify global distribution, deployment and management
  • Built-in Digi TrustFence® for device security, device identity and data privacy
  • Digi Remote Manager® software for easy setup, mass configuration and management
  • Dual Ethernet ports and single serial (RS-232) port
Datasheet
Product Specification
Anewtech-systems-Digi-IX20-4G-LTE-router-digi-international
CELLULAR
LTE (G4) WITH DIGI CORE® PLUG-IN LTE MODEM 1002-CMG4LTE Cat 4: B1, B2, B3, B4, B5, B7, B8, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41   
3G: B1, B2, B4, B5, B6, B8, B19   
2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz
CONNECTORS(2) 50 Ω SMA (center pin: female)
SIM SLOTS(2) Mini-SIM (2FF)
SIM SECURITYSecured in cellular module
WI-FI
MODULE1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz)
AUTHENTICATIONTACACS+, Enterprise RADIUS
MODESClient mode and access point mode simultaneously
CLIENTSMaximum 10 clients (access point mode: regardless of combination of clients and access points)
ACCESS POINTSMaximum 2 access points (access point mode: regardless of combination of clients and access points)
SECURITYWPA/WPA-2 personal, WPA/WPA-2 enterprise
CONNECTORS(1) 50 Ω SMA (center pin: male)
SOFTWARE AND MANAGEMENT
REMOTE MANAGEMENTDigi Remote Manager; SNMP v2/v3 (user installed/managed)
LOCAL MANAGEMENTWebUI (HTTP/HTTPS); CLI (Telnet, SSH)
MANAGEMENT / TROUBLESHOOTING TOOLSFTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with Syslog and SMTP client; NTP/SNTP; Nagios, Intelliflow, IPerf, DynamicDNS, Ping, Traceroute
MEMORY256 MB RAM, 256 MB flash
ETHERNET
PORTS(2) RJ-45; 10/100 Mbps (auto-sensing)
SERIAL
PORTS(1) DB9M; RS-232 DTE; Signal support TXD, RXD, CTS, DTR, DCD, flow control software (XON/OFF), hardware supported (CTS/RTS)
PHYSICAL
DIMENSIONS (L x W x H)107 mm x 162 mm x 35 mm (4.21 in x 6.38 in x 1.38 in)
WEIGHT0.65 kg (1.4 lb)
STATUS LEDsPower, Internet, Wi-Fi, SIM 1, SIM 2, signal strength (5), LTE
ENCLOSUREGlass-filled polyphenylene sulphide (PPS) / IP30
POWER REQUIREMENTS
POWER INPUT9 - 30 VDC, 1.0 A maximum
POWER CONSUMPTION2.5 W typical (idle); 6 W typical (peak Tx/Rx)
ENVIRONMENTAL
OPERATING TEMPERATUREModels with Wi-Fi: -20° C to 70° C (-4° F to 158° F); device performance may be impacted above 50° C (122° F)   
Models without Wi-Fi: -40° C to 70° C (-40° F to 158° F); device performance may be impacted above 50° C (122° F)
RELATIVE HUMIDITY5% to 95% (non-condensing)
APPROVALS
SAFETYIEC62368-1, CB, EN62311
ENVIRONMENTALROHS3
EMISSIONS / IMMUNITYFCC Part 15, Subpart B, Class A; CE, RCM; CAN ICES-3(B)/NMB-3(B)

Anewtech Digi-IX20 Digi International Industrial Router Enterprise 5G RouterDigi IX20 is a full-featured cellular router that can scale from basic connectivity applications to industrial-class routing and security solutions. Its flexible power and connectivity options make it a versatile choice for use in industrial infrastructure, digital signage, retail kiosks, service terminals and other critical assets with a need for secure transactions.

The high-performance architecture of the Digi IX20 router provides primary and backup WWAN connectivity over software selectable multi-carrier LTE. Digi IX20 supports software features for advanced security (stateful firewall, MAC filtering and VPN), redundancy (Digi SureLink®) and management (SNMP, event logging, analyzer trace and QOS), enabling it to be used in PCI or NERC-CIP compliant applications.

Digi IX20 can be managed with Digi Remote Manager®, a cloud-based solution that facilitates easy setup, mass configuration, maintenance and support for hundreds or even thousands of remote Digi and third-party devices. Digi Remote Manager lets you evaluate, update and configure your Digi enterprise routers and gateways — and the health of your network — at scale, after deployment.

The Digi IX20 family of routers has a single part number, which simplifies inventory control for global distribution and deployment. In addition, Digi IX20 is designed for Digi CORE® plug-in LTE modems that can be changed out or upgraded without replacing the entire router.

Ordering Information:

LTE Cat 4 Global
Part Number

Digi IX20W — LTE Cat 4 Global; Wi-Fi

  • LTE Cat 4 Global
  • Wi-Fi
  • (2) Ethernet
  • DB-9 RS-232
IX20-W0G4

Digi IX20 — LTE Cat 4 Global

  • LTE Cat 4 Global
  • (2) Ethernet
  • DB-9 RS-232
IX20-00G4