B-RASL-D5DE

SBC 3.5 supports Intel® Amston Lake Processor
Anewtech-Systems-Single-Board-Computer-B-RASL-D5DE
  • Intel® Amston Lake x7433RE
  • Supports triple display : LVDS(eDP)/ HDMI®/ DP++
  • Support 1 x DDR5-4800 MHz SO-DIMM, up to 16GB
  • 2 x Intel I226-IT GbE LAN
  • 2 x USB3.2 Gen1, 4 x USB2.0
  • 2 x RS232/422/485, 2 x RS232
  • 1 x M.2 M key M 2242/2280 support PCIe3.0 x1/SATA for NVMe/ SATA storage
  • 1 x Mini PCIe support PCIe3.0 x1 +USB2.0 w/ SIM slot for 4G/5GWIFI/BT module
  • 1 x M.2 B key 3042/3052 support USB3.2+PCIe3.0 x1 (opt)
  • Support 2x CAN bus (opt)
  • Support wide range temperature -40 ~ 85 degree C
  • DC-IN 12V
Product Specification
Anewtech-Systems-Single-Board-Computer-B-RASL-D5DE-Biostar
CPU SUPPORTIntel® Amston Lake Processor
Atom x7433RE
MEMORY1 x 262-pin DDR5-4800Mhz SO-DIMM, up to 16GB
EXPANSION SLOT1 x M.2 M Key 2242/ 2280 support PCIe3.0 x1/ SATA for NVMe /SATA storage
1 x Mini PCIe support PCIe3.0 x1 +USB2.0 w/ SIM lot for 4G/5G/WIFI/BT module
1 x M.2 B key 3042/3052 support PCIe3.0 x1 + USB3.2 (opt)
GRAPHICSIntel® Integrated Graphics, support triple display
1 x HDMI ®1.2 connector (1920x1200@60Hz)
1 x DP++1.4 connector (4096x2160 @60Hz)
1 x LVDS/eDP (1920x1200 @60Hz, LVDS/eDP switch mode by BIOS)
AUDIOAudio Codec: ALC897 + ALC105, support 4 ohm 2W amplifier ( not support wide temperature)
LANDual 2.5GbE
2 x Intel i226-IT
SUPER I/O CHIPIT8786E-I
REAR I/O1 x HDMI® connector
1 x DP connector
2 x USB2.0 Type A connector
2 x USB3.2 Gen1 Type A connector
2 x RJ45 connectors, support 1G
INTERNAL I/OExpansion slots:
1 x M.2 M key
1 x M.2 B key (opt)
1 x Mini PCIe
1x SIM slot for M.2 B key or Mini PCIe ( default mini PCIe)
SATA:
1 x SATA3 7pin connector
1 x 1*4 pin SATA power box header
Display:
1 x 2*20 pin LVDS/eDP box header (share with the same connector, LVDS/eDP switch mode by BIOS)
1 x 1*3 pin LCD power select header (3.3V/5V, default is 3.3V)
1 x 1*5 pin LCD backlight control box header
1 x 1*3 pin LCD backlight control power select header (5V/12V, default is 12V)
Audio: (opt., not support Wide Temp.)
1 x 2*5-pin header for MIC-in/LINE-in/LINE-out
1 x 1*4 pin wafer box for 2x2W/ 4ohm Speaker
USB:
1 x 2*5 pin header for 2 x USB2.0
1x 1*3 pin header for Rear USB3.2 power select (5V/ 5V_DUAL, default is 5V)
Serial Port:
1 x 2*10 pin headers(JCOM1), support 2 x RS232/ RS422/ RS485(COM1/COM2)
1 x 2*10 pin headers((JCOM2) support 2x RS232 (COM3/COM4)
2 x 1*3 pin pin headers for COM1/2 Power Select (NC/5V/12V, default is NC)
CAN bus: (opt)
1x 1*6 pin header, support 2x CAN bus
1x 2*2 pin header for bus termination
Digital IO
1 x 2*5 Pin 8-Bit DIO header (5V)
Others:
1x 1*2 pin header clear CMOS
DC-IN 12V , 2pin power connector
1x 1*2 pin header for power button
1x 1*2 pin header for system reset
1x 4 pin header for +12V CPU fan
1 x Power LED onboard for APCI power status
TPM2.0 onboard
DIMENSION148 x 102 x 1.6 mm
ENVIRONMENTWide range temperature: -40ºC ~ 85ºC Humidity : 5% ~ 90%
OS SUPPORTSupport Windows 10 IoT Enterprise 21H2/ 11 IoT Enterprise 24H2 or later version
Support Ubuntu 22.04/ 24.04