Digi IX15
Programmable IoT gateway connects Digi XBee-enabled devices to remote applications
- Digi XBee® (Zigbee®, DigiMesh®, 802.15.4), Bluetooth® 5.0 and RS-232/485 for connection to local devices
- Open source Python environment for custom application development
- LTE Cat 4 cellular and 10/100 Ethernet WAN connectivity
- Digi Remote Manager® platform for easy setup, mass configuration/firmware updates, remote device management and out-of-band management
- Full-featured industrial cellular routing platform
- Redundant connectivity with dual SIMs and Digi SureLink®
- Built-in Digi TrustFence® for device security, device identity and data privacy
| DIGI XBEE® | |
| XBEE MODULE | Standard: Digi XBee® 3 Zigbee 3.0 MMT PRO: Digi XBee® 3 PRO Zigbee 3.0 MMT |
| XBEE STACK | Zigbee® Standard and Zigbee PRO versions available |
| ZIGBEE TRANSMIT POWER | Standard: 6.3 mW (8 dBm); PRO: 63 mW (18 dBm) |
| ZIGBEE RECEIVER SENSITIVITY | -102 dBm |
| XBEE CONNECTOR | (1) 50 Ω RP-SMA (center pin: male) |
| CELLULAR | |
| BANDS | LTE Cat 4: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41 3G: B1, B2, B4, B5, B6, B8, B19 2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz |
| CONNECTORS | (2) 50 Ω SMA (center pin: female) |
| SIM SLOTS | (2) Mini-SIM (2FF) |
| SIM SECURITY | Behind SIM cover, secured with screw (#1 Phillips) |
| SOFTWARE AND MANAGEMENT | |
| PYTHON | Python 3 |
| REMOTE MANAGEMENT | Digi Remote Manager®; SNMP v2/v3 (user installed/managed) |
| LOCAL MANAGEMENT | WebUI (HTTP/HTTPS); CLI (Telnet, SSH) |
| MANAGEMENT / TROUBLESHOOTING TOOLS | FTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with syslog and SMTP client; NTP/SNTP; Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute |
| ETHERNET | |
| PORTS | (1) RJ-45; 10/100 Mbps (auto-sensing) |
| SERIAL | |
| PORTS | (1) RJ-45 10-pin (10P10C); RS-232/485; software selectable - RS-232 DTE (RXD, TXD, RTS, CTS, DTR, DCD, DSR, RI) - RS-485 (TX/RX+; RX/TX-); half-duplex |
| PHYSICAL | |
| DIMENSIONS (L x W x H) | 157 mm x 106 mm x 35 mm (6.18 in x 4.17 in x 1.38 in) |
| WEIGHT | 0.39 kg (0.86 lb) |
| STATUS LEDs | Power, SIM, LTE/Internet, XBee, signal strength (5) |
| ENCLOSURE | Glass-filled polyphenylene sulphide (PPS) / IP30 |
| POWER REQUIREMENTS | |
| POWER INPUT | 9 - 30 VDC, 1.0 A maximum |
| POWER CONSUMPTION | 2.5 W typical (idle); 6 W typical (peak Tx/Rx) |
| ENVIRONMENTAL | |
| OPERATING TEMPERATURE | -40° C to 74° C (-40° F to 165° F); device performance may be impacted above 60° C (140° F) |
| RELATIVE HUMIDITY | 5% to 95% (non-condensing) |
| SAFETY | UL60950-1, IEC62368-1, CB, EN62311, UL 121201/CSA 213 (Class 1, Div 2) |
| ENVIRONMENTAL | ROHS3 |
| EMISSIONS / IMMUNITY | CE; RED; FCC Part 15, Subpart B*; ICES-003; AU/NZS CISPR32 |
With certification for Class 1 Division 2 deployment and rugged enclosure, Digi IX15 is ideal for the harsh environments found in oil and gas, water/wastewater, solar, agriculture and other industrial applications. For developers needing a highly secure, common platform to cut costs and time-to-market, Digi IX15 reduces risk and drives project efficiencies.
The Digi IX15 IoT gateway includes a simple, open source Python development environment that enables custom applications to perform edge computing locally while providing the most optimal, resilient connectivity between your XBee network and cloud-based applications. Gain critical insights into your deployed devices and manage your network with Digi Remote Manager® (Digi RM) — the command center for your deployment.
Digi RM is a cloud-based solution that facilitates easy setup, mass configuration, maintenance and visibility into the health of your network, whether you deploy dozens or thousands of devices.
In the event of an interruption to your primary network connection, Digi RM also provides secure terminal access for out-of-band management of edge devices via serial port and command-line interface.
Digi IX15 - XBee 3
- Digi XBee® 3 Zigbee 3.0 MMT
- LTE Cat 4
- Regions: EU, UK, Japan
- (1) Ethernet
- RS-232/485