AD-ADAM-4021
1AO RS-485 Remote I/O Module. 1ch analog output
- 1ch analog output
- Protocols: ASCII
- Watchdog timer to recover the system
- 3000VDC isolation protection
| Model | ADAM-4021-F |
| Analog Output | |
| Channels | 1 |
| Output Ranges | 0~10 V, 0~20 mA, 4~20 mA |
| Output Type | V, mA |
| Resolution | 12-bit |
| Communications | |
| Interface | RS-485 |
| Environment | |
| Isolation Voltage | 3,000 VDC |
| Operating Temperature | -10~70 °C (14~158 °F) |
| General | |
| Connectors | 1 x 10-pin plug-in screw terminal |
| Protocol | ASCII command, Modbus/RTU |
| Power Requirements | |
| Input Voltage | 10~30 VDC |
| Hardware | |
| Certification | CE, FCC |
Analog output module receives its digital input through an RS-485 interface from the host computer. The format of the data is either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR), depending on the module ’s configuration. It then uses its microprocessor-controlled D/A converter to convert the digital data into output signals. You get a true readback of the analog output signal from the unit ’s ADC, which independently monitors the output.
You can specify slew rates and start-up currents through the configuration software. The Analog Output Module can supply single-channel analog output in a range of voltages or currents. They protect your equipment from ground loops and power surges by providing opto-isolation of the D/A output. The transformer-based isolation is up to 3000 VDC.
ADAM-4000/4100 Series Comparison
| Series Name | ADAM-4000 Series | ADAM-4100 Series |
| Operation Temperature | -10 ~ 70°C | -40 ~ 85°C |
| Power Input | 10 ~ 30VDC | 10 ~ 48VDC |
| ESD | 8KV Air, 4KV contact | 8KV Air, 6KV contact |
| EFT | 2KV | 4KV |
| Surge | 0.5KV | 4KV |
| Communication Interface: RS-485 | Yes | Yes |
| Communication Interface: USB | - | Yes |
