ID-E1.S 4TS2-P

Form Factor: E1.S; Flash Type: 3D TLC; Capacity: 400GB~6.4TB; Interface: PCIe Gen 4x4
Anewtech-Systems-Flash-Storage-ID-E1S-4TS2-P
  • PCIe Gen 4x4, NVMe 1.4
  • iCell technology for power loss protection
  • Stable sustained performance
  • LDPC ECC engine supported
  • Thermal Throttling management
Datasheet
Product Specification
ModelE1.S 4TS2-P
Form FactorE1.S
Flash Type3D TLC
Capacity400GB~6.4TB
Sequential R/W (MB/sec, max.)6,900/4,650
Max. Power Consumption12.4W
Max. Channels8
Thermal SensorY
External DRAM BufferY
H/W Write ProtectN
Dimension (WxLxH/mm)5.9mm: 31.5 x 111.5 x 5.9 mm
9.5mm: 33.75 x 118.75 x 9.5 mm
15mm: 33.75 x 118.75 x 15 mm
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Storage Temperature-40°C ~ +85°C

BORN FOR SUPERIOR PERFORMANCE 
The Innodisk E1.S 4TS2-P is an NVMe SSD in the standard E1.S form factor, featuring a PCIe Gen 4 x4 interface and 3D TLC NAND Flash. This series offers high DWPD, wide temperature support, and up to 6.4TB of capacity, making it ideal for edge server applications. Enhanced thermal management and hot-swap functionality, along with Innodisk’s SSD maintenance features, position it as the new mainstream choice for data center boot drives.

WIDE TEMPERATURE TOLERANCE FOR EXTREME SCENARIOS

The E1.S 4TS2-P is engineered for superior thermal management in edge servers, with a temperature range of -40°C to 85°C. Its unique form factor and Dynamic Thermal Throttling mechanism enable sustained peak performance under intensive workloads. Additionally, Innodisk's 15mm asymmetrical heatsink design ensures exceptional heat dissipation and efficiency.


Ordering Information
Operating TemperatureStandard Grade 
(0°C ~ 70°C)
Industrial Grade 
(-40°C ~ 85°C)
400GBDSE1S-400DP2KCAEFP%DSE1S-400DP2KWAEFP%
800GBDSE1S-800DP2KCAEFP%DSE1S-800DP2KWAEFP%
1.6TBDSE1S-1T6DP2KCAEFP%DSE1S-1T6DP2KWAEFP%
3.2TBDSE1S-3T2DP2KCAEFP%DSE1S-3T2DP2KWAEFP%
6.4TBDSE1S-6T4DP2KCBEFP%DSE1S-6T4DP2KWBEFP%

Operation temperature based on temperature obtained from S.M.A.R.T.
% : Non-existent=5.9mm / H=9.5mm enclosure / H1=15mm enclosure
E1.S 4TS2-P specifications are subject to change.

Enterprise and Datacenter Standard Form Factor (EDSFF)

Enterprise and Datacenter Standard Form Factor (EDSFF) encompasses a spectrum of form factors crafted for various storage requirements within the dynamic data center environment. These SSD variations incorporate advantages in capacity, thermal and power management, scalability, manageability, and performance.

Anewtech-Systems-Flash-Storage-ID-E3S-4TS2-P-nvme-ssd
ID-E3.S 4TS2-P
PCIe Gen. 4x4, NVMe SSD. 
Form Factor: E3.S; Flash Type: 3D TLC; 
Capacity: 400GB~12.8TB
Anewtech-Systems-Flash-Storage-ID-E1S-4TG2-P-nvme-ssd
ID-E1.S 4TG2-P
PCIe Gen. 4x4, NVMe SSD. 
Form Factor: E1.S; Flash Type: 3D TLC; 
Capacity: 512GB~8TB
Anewtech-Systems-Flash-Storage-ID-E1S-4TS2-P-nvme-ssd
ID-E1.S 4TS2-P
PCIe Gen. 4x4, NVMe SSD. 
Form Factor: E1.S; Flash Type: 3D TLC; 
Capacity: 400GB~6.4TB