ID-InnoOSR M.2 (S80) 3TO7
Interface: SATA III 6.0 Gb/s. Flash Type: 3D TLC. Capacity: 64GB~1TB
- M.2 SSD Dedicates to System Recovery
- Firmware Level Back Up to Prevent Compatibility Issue
- Supports Hardware GPIO and Software Triggering
- Reserved GPIO Pins to Accommodate your System Design
Datasheet
Product Specification
| Model | InnoOSR M.2 (S80) 3TO7 |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | 3D TLC |
| Capacity | 64GB~1TB |
| Sequential R/W (MB/sec, max.) | 560/340 |
| Max. Power Consumption | 2.1W |
| Max. Channels | 4 |
| Thermal Sensor | Y |
| S.M.A.R.T. | Y |
| ATA Security | Y |
| Dimension (WxLxH/mm) | 22.0 x 80.0 x 3.5 |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
M.2 (S80) 3TO7 provides high capacity flash memory Solid State Drive (SSD) that electrically complies with Serial ATA (SATA) standard supporting up to SATA III standard (6.0Gb/s) speed and capable of achieving excellent performance with its 4 channels 4CE ID301 controller.
Besides outstanding balance of performance, rich form factors, capacity and customization flexibility, the key feature of InnoOSR family is the single-device, Firmware LBA level OS & Data back-up capability which enables on-site recovery of operating system by simple procedure such as GPIO triggering or application commands. Full Recovery, Just a Click Away.