O-IGMG-P83244GC+-D4G
Industrial 4G LTE Gateway with with 4x10/100/1000Base-T(X), 4xGigabit SFP Combo ports, 2 Serial ports
- Powerful all-in-one industrial gateway solution for Edge to Cloud IIoT applications
- Industrial grade design compliant with the requirements of IEC 61850-3
- Support redundant/load-balanced 4G LTE connection certificated by AT&T
- Provide built-in 8-port Gigabit Ethernet switch with 4x10/100/1000Base-T(X) and 4xGigabit SFP Combo ports
- Support 2x Serial ports: RS-232/422/485 in DB9 connector and RS-422/485 in terminal block
- Support ORing Open Gateway (protocol converter) software feature for easy and quick IIoT deployment
- Inductive Automation Ignition/Ignition Edge on board – powerful, web-deployed industrial application platform for HMI, SCADA, MES and IIoT with MQTT connections
- Node-RED on board for data flow design and rapid prototyping
- Support MQTT/Sparkplug B and CoAP IoT protocols
- Support Modbus TCP/RTU industrial protocols
Datasheet
Product Specification
| Physical ports | |
| 10/100/1000Base-T(X) ports in RJ45 | 4 |
| Cellular Interface | |
| SIM card slot | 2 |
| Band options | America(US) LTE: 700/1700/2100/ MHz UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+: 800/850/1900/2100 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz Europe(EU) LTE: FDD:2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20) MHz TDD:TDD:2600(B38)/2300(B40)/2500(B41) MHz UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+: 2100(B1)/900(B8) MHz GSM/GPRS/EDGE: 900/850 MHz |
| LED Indicators | |
| Cellular signal strength | 3 x LEDs Green for Strength: 130% 75% |
| Serial TX/RX Indicator | Red : Receiving data Green : Transmitting data |
| Storage Indicator | Green Blinking : Data access |
| Ring Master Indicator (R.M.) | Reserved |
| O-Ring Indicator (Ring) | Reserved |
| Fault Indicator (Fault) | Power failure or port disconnected |
| Power | |
| Power consumption (Typ.) | 18 Watts |
| Connector | Terminal Block x 1 (Port 1), DB9 male x 1 (Port 2) |
| Power Input | Dual DC inputs. 12-48VDC on 6-pin terminal block |
| Overload current protection | Present |
| Reverse polarity protection | Present |
| Serial Interface | |
| Connector | Terminal Block x 1 (Port 1), DB9 male x 1 (Port 2) |
| Operation Mode | Port 1 : RS-422/RS-485(2W/4W), Which can be configured by utility Port 2 : RS-232/RS-422/RS-485(2W/4W). Which can be configured by utility |
| Serial Baud Rate | 110 bps to 921.6 Kbps |
| Data Bits | 7, 8 |
| Parity | odd, even, none, mark, space |
| Stop Bits | 1, 1.5, 2 |
| Flow Control | RS-232 : TxD, RxD, DCD, RTS, CTS, DSR, DTR, RI, GND RS-422 : TX+, TX-, RX+, RX-, GND RS-485 (2W): D+, DRS- 485 (4W): TX+, TX-, RX+, RX-, GND |
| Protection / Certification | |
| Safety | EN60950-1 |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimensions (mm) | 116.4mm W x 170mm D x 154mm H (4.6" W x 6.7" D x 6.1" H) |
| Weight (g) | 2400 g |
| I/O Interface | |
| Connector | Terminal Block x 1 (Port 1), DB9 male x 1 (Port 2) |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Environmental | |
| Storage Temperature | -40 to 85℃ (-40 to 185℉) |
| Operating Temperature | -40 to 75℃ (-40 to 167℉) |
| Operating Humidity | 5% to 95% Non-condensing |