AS-2114S-WN24RT
2U AMD Server. 24 hot-swap 2.5" U.2 NVMe drive bays
- Single AMD EPYC™ 7003/7002 Series Processor (7003 Series Processor drop-in support requires BIOS version 2.0 or newer)
- Up to 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs
- Expansion slots: Up to 2 PCI-E 4.0 x16 (FH/HL) slots: 24-NVMe configuration (Standard) – 1 slot available
- 20-NVMe configuration – 2 slots available
- M.2 Interface: 2 PCI-E 4.0 x2
- M.2 Form Factor: 2280, 22110
- M.2 Key: Onboard M-key
- Integrated IPMI 2.0 + KVM with dedicated LAN
- 2x 10GBase-T LAN ports via Broadcom BCM57416
- Up to 24 hot-swap 2.5" U.2 NVMe drive bays
- 1200W Redundant Power Supplies Titanium Level (96%)
Datasheet
Product Specification
| Product SKU | A+ Server 2114S-WN24RT |
| Motherboard | H12SSW-NTR |
| Processor/Chipset | |
| CPU | Single AMD EPYC™ 7003/7002 Series Processor (7003 Series Processor drop-in support requires BIOS version 2.0 or newer) Socket SP3 Support CPU TDP up to 280W |
| Cores | Up to 64 Cores |
| Chipset | System on Chip (SoC) |
| System Memory | |
| Memory Capacity | 16 DIMM slots Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM 8-channel memory bus |
| Memory Type | DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs |
| DIMM Sizes | 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC |
| Network Controllers | Broadcom BCM57416 Controller |
| VGA | ASPEED AST2500 BMC |
| Expansion Slots | |
| PCI Express | 1 or 2* PCI-E 4.0 x16 (FH/HL) slots |
| M.2 | Interface: 2 PCI-E 4.0 x2 Form Factor: 2280, 22110 Key: Onboard M-key |
| Note | * 2 slots available using 20-NVMe configuration (24 NVMe is standard) |
| Input / Output | |
| NVMe | Up to 24 U.2 NVMe support |
| LAN | 2x 10GBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 5 USB 3.0 ports (4 rear + 1 Type A) |
| VGA | 1 VGA port |
| Others | 1 COM port 2 SATA DOM power connectors TPM 1.2 header, TPM 2.0 header |
| System BIOS | |
| BIOS Type | AMI 256Mb SPI Flash EEPROM |
| BIOS Features | Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1 |
| Chassis | |
| Form Factor | 2U |
| Model | CSE-216BTS-R1K23WBP |
| Dimensions | |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 24.8" (630mm) |
| Weight | Net Weight: 34 lbs (15.42 kg) Gross Weight: 59 lbs (26.76 kg) |
| Front Panel | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED |
| Drive Bays | |
| Hot-swap | Up to 24 hot-swap 2.5" U.2 NVMe drive bays |
| System Cooling | |
| Fans | 3 heavy-duty PWM fans with optimal fan speed control |
| Air Shroud | 1 Air Shroud |
| Power Supply (76mm Width) | |
| 1200W Redundant Power Supplies with PMBus | |
| Total Output Power | 1000W/1200W |
| Dimension (W x H x L) | 76 x 40 x 336 mm |
| Input | 100-127Vac / 15-12A / 50-60Hz 200-240Vac / 8.5-7A / 50-60Hz 200-240Vdc / 8.5-7A (for CCC only) |
| +12V | Max: 83A / Min: 0A (100-127Vac) Max: 100A / Min: 0A (200-240Vac) Max: 100A / Min: 0A (200-240Vdc) |
| +5Vsb | Max: 4A / Min: 0A |
| Output Type | 19 Pairs Gold Finger Connector |
| PC Health Monitoring | |
| CPU | Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator |
| FAN | Up to 6-fan status tachometer monitoring Up to six 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic |
| LED | CPU / System Overheat LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |