ConnectPort X2
Industrial-Grade Programmable Digi XBee RF modules to Ethernet IP Gateway
- Ethernet gateways supporting XBee Zigbee and other XBee RF modules
- Easy development Python scripting
- Multiple form factors and configuration options
- Secure, anywhere management using Digi Remote Manager
| General | |
| Management | HTTP/HTTPS web interface, Password access control, IP service port control, Optional secure enterprise management via Digi Remote Manager |
| Protocols | UDP/TCP, DHCP, SNMPv1 |
| Total Memory | 8 MB Flash, 16 MB RAM |
| LEDs | Ethernet status, Power, link/activity |
| Security | SSL tunnels |
| Dimensions (L x W x H) | 5.50 in x 2.75 in x 1.13 in (13.9 cm x 7.0 cm x 2.9 cm); 0.44 lb (0.20 kg) |
| Wireless Interfaces | |
| XBee Module Options | 802.15.4, , DigiMesh 2.4, 900HP, XSC, 868 |
| Antenna Port | RPSMA female |
| Ethernet | |
| Ports | , 802.15.4, DigiMesh (XBee-PRO 900HP) |
| Physical Layer | 10/100Base-T |
| Data Rate and Mode | 10/100 Mbps (auto-sensing); Full or half duplex (auto-sensing) |
| Power Requirements | |
| Power Input | 9-30 VDC |
| Power Supply | 12 VDC power supply for 0° C to 60° C (32° F to 140° F) with locking barrel connector included; Extended temperature power supply available separately |
| Power Consumption | Idle: 1.2 W, Max: 3.4 W |
| Surge Protection (w/included power supply) | 4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4 |
| Environmental | |
| Operating Temperature | -30° C to +70° C (-22° F to +158° F) |
| Relative Humidity | 5% to 95% (non-condensing) |
| Ethernet Isolation | 1500 VAC min per IEEE802.3/ANSI X3.263 |
| Regulatory Approvals | |
| Safety | EN60950 |
| Emissions/Immunity | CE, FCC Part 15 (Class A) |
ConnectPort X2 is a small XBee to Ethernet gateway that provides low-cost IP networking of XBee-enabled devices and sensor networks. Featuring a simple development environment, ConnectPort X2 enables custom applications to run locally while interfacing across existing Ethernet networks for WAN connectivity to a centralized server.
ConnectPort X2 gateways benefit from the enhanced management capabilities offered by Digi Remote Manager. This web-based device management system enables remote access and control of your Digi gateways.
ConnectPort X2 products feature rapid M2M-specific application development on the industry standard Python scripting engine. Digi ESP™ provides an IDE featuring device detection, debugging, compiling and downloading of Python code to Digi gateways.