ID-SATADOM-ML 3MG2-P
Flash Type: MLC. Type: Vertical. Capacity: 32GB~256GB
- Built-in Pin 8 power supply
- High IOPS to reduce boot up timing
- Innovative Firmware Algorithm
- Built in iData Guard
- Hardware write protection supported
| Model Name | SATADOM-ML 3MG2-P |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | MLC |
| Type | Vertical |
| Capacity | 32GB~256GB |
| Max. Channels | 4 |
| Sequential R/W (MB/sec, max.) | 520/180 |
| Max. Power Consumption | 2.39A (5V x 478mA ) |
| Thermal Sensor | Y |
| H/W Write Protect | Y |
| Pin 7 Power | Y |
| Pin 8 Power | Y |
| ATA Security | Y |
| S.M.A.R.T. | Y |
| Dimension (WxLxH/mm) | 37.17 x 31.5 x 10.2 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
SATADOM supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM®-ML 3MG2-P is designed as the smallest form factor size that could enhance compatibility with various design applications. The innovative Pin 8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on a customer’s system without an additional power cable.
Besides, the boot time and power consumption are lower than those of a hard disk drive (HDD), and it operates reliably in harsh environments while complying with the ATA protocol. No additional drives are required, and the SSD can be configured as a boot device or data storage device.
Ordering Information
| Operating Temperature | Standard Grade (0°C ~ 70°C) | Industrial Grade (-40°C ~ 85°C) |
| 32GB | DGSML-32GD81BCBDC* | DGSML-32GD81BWBDC* |
| 64GB | DGSML-64GD81BCBQC* | DGSML-64GD81BWBQC* |
| 128GB | DGSML-A28D81BCBQC* | DGSML-A28D81BWBQC* |
| 256GB | DGSML-B56D81BCBQC* | DGSML-B56D81BWBQC* |
*PN end with A : Pin 8 + power cable / B : Pin 8 + Pin 7