ID-SATADOM-ML 3TG6-P
Flash Type: 3D TLC. Type: Vertical. Capacity: 128GB~256GB
- Built-in Pin 8 power supply
- Best boot drive solution for server and embedded system
- SATA 6Gb/s interface
- High IOPS to reduce boot up timing
- End to End data path protection
- Anti-vibration mechanical design
- Built in iData Guard
- Hardware write protection supported
| Model | SATADOM-ML 3TG6-P |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | 3D TLC |
| Type | Vertical |
| Capacity | 128GB~256GB |
| Sequential R/W (MB/sec, max.) | 560/90 |
| Max. Power Consumption | 2.14W (5V x 428mA ) |
| Max. Channels | 4 |
| Thermal Sensor | Y |
| H/W Write Protect | Y |
| Pin 7 Power | Y |
| Pin 8 Power | Y |
| S.M.A.R.T. | Y |
| ATA Security | Y |
| Dimension (WxLxH/mm) | 37.17 x 31.5 x 10.2 |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
SATADOM supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-ML 3TG6-P is designed as the smallest form factor size that could enhance compatibility with various design applications.
The innovative Pin 8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on a customer’s system without an additional power cable. Besides, the boot time and power consumption are lower than those of a hard disk drive (HDD), and it operates reliably in harsh environments while complying with the ATA protocol. No additional drives are required, and the SSD can be configured as a boot device or data storage device.
Ordering Information
| Operating Temperature | Standard Grade (0°C ~ 70°C) | Industrial Grade (-40°C ~ 85°C) |
| 128GB | DGSML-A28M71ECAQF* | DGSML-A28M71EWAQF* |
| 256GB | DGSML-B56M71ECAQF* | DGSML-B56M71EWAQF* |
*PN end with A : Pin 8 + power cable / B : Pin 8 + Pin 7