ID-SATADOM-SH 3ME3
Flash Type: SLC. Type: Horizontal. Capacity: 8GB~128GB
- High IOPS to reduce boot up timing
- Built-in Pin 7 power supply
- DRAM-less, 100% data integrity
- Innovative Firmware Algorithm
- Built in iData Guard
Datasheet
Product Specification
| Model Name | SATADOM-SH 3ME3 |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | MLC |
| Type | Horizontal |
| Capacity | 8GB~128GB |
| Max. Channels | 4 |
| Sequential R/W (MB/sec, max.) | 220/80 |
| Max. Power Consumption | 1.8W (5V x 370mA ) |
| Thermal Sensor | Wide Temp. only |
| H/W Write Protect | Y |
| Pin 7 Power | Y |
| Pin 8 Power | N |
| ATA Security | Y |
| S.M.A.R.T. | Y |
| Dimension (WxLxH/mm) | 25.2 x 41.5 x 6.8 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature | Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
SATADOM-SH 3ME3 is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. SATADOM-SH 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
SATADOM-SH 3ME3 effectively reduces the boot time of the operation system, and the power consumption is less than that of a hard disk drive (HDD), which complies with ATA protocol. No additional drives are required, and they can be configured as boot devices or data storage devices.
Ordering Information
| Operating Temperature | Standard Grade (0°C ~ 70°C) | Industrial Grade (-40°C ~ 85°C) |
| 8GB | DESSH-08GD09*C1SC(F) | DESSH-08GD09*W1SC(F) |
| 16GB | DESSH-16GD09*C1SC(F) | DESSH-16GD09*W1SC(F) |
| 32GB | DESSH-32GD09*C1SC(F) | DESSH-32GD09*W1SC(F) |
| 64GB | DESSH-64GD09*CADC(F) | DESSH-64GD09*WADC(F) |
| 128GB | DESSH-A28D09* CADC(F) | DESSH-A28D09* WADC(F) |
*S : Toshiba A19nm MLC / B : Toshiba 15nm MLC
PN end with F is SATADOM Pin 7 with power supply version, which doesn’t provide power cable.