ID-SATADOM-SH 3ME3 V2

Flash Type: MLC. Type: Horizontal. Capacity:8GB~128GB
Anewtech-Systems-Flash-Storage-ID-SATADOM-SH-3ME3-V2-innodisk
  • High IOPS to reduce boot up timing
  • DRAM-less, 100% data integrity
  • Innovative Firmware Algorithm
  • Anti-vibration mechanical design
  • Built in iData Guard
Datasheet
ID-SATADOM-SH-3ME3-V2.pdf
Product Specification
Model NameSATADOM-SH 3ME3 V2
InterfaceSATA III 6.0 Gb/s
Flash TypeMLC
TypeHorizontal
Capacity8GB~128GB
Max. Channels2
Sequential R/W (MB/sec, max.)200/80
Max. Power Consumption1.8W (5V x 370mA )
Thermal SensorWide Temp. only
H/W Write ProtectN
Pin 8 PowerY
Pin 7 PowerOptional
ATA SecurityY
S.M.A.R.T.Y
Dimension (WxLxH/mm)30 x 28.4 x 7.4
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Storage Temperature-55°C ~ +95°C

SATADOM  supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-SH 3ME3 V2 is designed as the smallest form factor size that could enhance compatibility with various design applications. The innovative Pin 8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on a customer’s system without an additional power cable.

 Besides, the boot time and power consumption are lower than those of a hard disk drive (HDD), and it operates reliably in harsh environments while complying with the ATA protocol. No additional drives are required, and the SSD can be configured as a boot device or data storage device.

Ordering Information
Operating TemperatureStandard Grade (0°C ~ 70°C)Industrial Grade (-40°C ~ 85°C)
8GBDESSH-08GD09*C1SCA DESSH-08GD09*C1SCBDESSH-08GD09*W1SCA DESSH-08GD09*W1SCB
16GBDESSH-16GD09*C1SCA DESSH-16GD09*C1SCBDESSH-16GD09*W1SCA DESSH-16GD09*W1SCB
32GBDESSH-32GD09*C1SCA DESSH-32GD09*C1SCBDESSH-32GD09*W1SCA DESSH-32GD09*W1SCB
64GBDESSH-64GD09*CADCA DESSH-64GD09*CADCBDESSH-64GD09*WADCA DESSH-64GD09*WADCB
128GBDESSH-A28D09*CADCA DESSH-A28D09*CADCBDESSH-A28D09*WADCA DESSH-A28D09*WADCB

*S : Toshiba A19nm MLC / B : Toshiba 15nm MLC
PN end with A : Pin 8 + power cable / B : Pin 8 + Pin 7