O-IGS-P9164GC-HV

IEC 61850-3 Managed Ethernet Switch with with 16x10/100/1000Base-T(X) ports. Dual AC/DC
Anewtech-Systems-Industrial-Ethernet-Switch-O-IGS-P9164GC-HV
  • Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
  • Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor's ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support IEC 62439-2 MRP (Media Redundancy Protocol)
  • Support IEEE 1588v2 clock Synchronization
  • Built-in MMS server and IEC 61850 QoS 
  • Support IPV6 new internet protocol version
  • Support Modbus TCP and Ethernet/IP
Product Specification
Anewtech-Systems-Industrial-Ethernet-Switch-O-IGS-P9812GP-IEC-62443-4-2
Physical ports 
10/100Base-T(X) ports in RJ4516 
Gigabit Combo ports with 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP ports4 
LED Indicators 
System Indicator (Status)Green : Power LED x 2 
Cellular signal strengthGreen : Indicates that the system is operating in O-Ring Master mode 
Serial TX/RX IndicatorGreen : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.\
 
Storage IndicatorAmber : Indicate unexpected event occurred 
10/100/1000Base-T(X) RJ45 port indicatorDual color LED : Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator 
100/1000Base-X SFP Port IndicatorGreen for port Link/Act. 
Power 
Power consumption (Typ.)18W 
Redundant Input powerDual power inputs with 88~264VAC/85~300VDC 
Overload current protectionPresent 
Technology 
Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
 
MAC Table8K 
Packet buffer Size4Mbits 
Priority QueuesStore-and-Forward 
ProcessingSwitching latency: 7 μs
Switching bandwidth: 40Gbps
Max. Number of Available VLANs : 4095
VLAN ID Range : 1 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define
 
Switch PropertiesUp to 9.6K Bytes 
Jumbo frameDevice Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
 
Security FeaturesSTP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
 
Software FeaturesO-Ring
Open-Ring
O-Chain
MRP*NOTE
MSTP (RSTP/STP compatible)
 
Fault contact 
RelayRelay output to carry capacity of 1A at 24VDC 
Environmental 
Storage Temperature-40 to 85°C (-40 to 185°F ) 
Operating Temperature-40 to 85°C (-40 to 185°F ) 
Operating Humidity5% to 95% Non-condensing 
Warranty 
Warranty5 years 
Regulatory Approvals 
EMCCE EMC (EN55035, EN 55032), IEC 61850-3, IEEE 1613
EMIFCC Part 15, CISPR (EN55022) class A
EMSEN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN62368-1

O-IGS-P9164 series are IEC 61850-3 managed redundant ring Ethernet switches. These switches are designed for power substation  and rolling stock applications, are fully compliant with the requirement of IEC 61850-3 and IEEE 1613. 

  • O-IGS-P9164GF series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x1000Base-X optical fiber port with SC connector. 
  • O-IGS-P9164GFX series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x100Base-FX optical fiber port with SC connector. 
  • O-IGS-P9164GC series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4xGigabit combo ports with SFP socket. 

With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 75°C. IGS-P9164GF(X) series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. The switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.