O-IAP-420
Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)
- High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
- Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
- Provide 2 port 10/100Base-T(X) Ethernet ports
- Support X-Roaming < 100 ms
- Support AP/Client/Bridge/AP-Client Mode
- Support Multiple-SSID to 4 SSID
- Secured Management by HTTPs
- Wireless connecting status monitoring
Datasheet
Product Specification
Model | IAP-420 | IAP-420+ |
Physical Ports | ||
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 | |
PoE P.D. Port | - | Present at ETH |
WLAN Interface | ||
Operating Mode | AP/Client/Bridge/AP-Client | |
Antenna and Connector | 1 x External reverse SMA-type antenna connector | |
Radio Frequency Type | DSSS, OFDM | |
Modulation | IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM | |
Frequency Band | America / FCC: 2.412~2.462 GHz (11 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels ) | |
Transmission Rate | 802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n(40MHz): UP to 150 Mbps | |
Transmit Power | 802.11b: 19dBm ±1.5dBm 802.11g: 17dBm ±1.5dBm 802.11n(2.4G@20MHz): 16.5dBm ±1.5dBm 802.11n(2.4G@40MHz): 14.5dBm ±1.5dBm | |
Receiver Sensitivity | 802.11b: -90dBm ±2dBm@1Mbps 802.11g: -72dBm ±2dBm@54Mbps 802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm | |
Encryption Security | WEP: (64-bit, 128-bit key supported) WPA/WPA2:802.11i (WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption | |
Wireless Security | SSID broadcast disable and enable | |
Protocol Support | ||
Protocol | ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP | |
LED Indicators | ||
Power Indicator | LED x 3, PWR 1, 2, (PoE): Green On: Power is on and functioning Normally. | |
10/100Base-T(X) RJ45 Port Indicator | LED x 2 , Green for port Link/Act at 100Mbps. | |
WLAN LEDs | WLAN Link /ACT: Green: Blinking | |
Power | ||
Redundant Input Power | Dual DC inputs. 12~48VDC on 4-pin terminal block | |
Power Consumption (Typ.) | 4 Watts | |
Overload Current Protection | Present | |
Reverse Polarity Protection | Present | |
Physical Characteristics | ||
Enclosure | IP-30 | |
Dimensions (W x D x H) | 41(W)x81(D)x95(H) mm | |
Weight (g) | 292 g | 297 g |
Environmental | ||
Storage Temperature | -40 to 85°C (-40 to 185°F) | |
Operating Temperature | -10 to 60°C(14 to 140°F) | |
Operating Humidity | 5% to 95% Non-condensing | |
Regulatory Approvals | ||
EMI | FCC Part 15, CISPR (EN55022) class A | |
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-31 | |
Vibration | IEC60068-2-6 | |
Safety | EN60950-1 |