O-IAP-420+
Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)
- High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
- Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK (TKIP,AES)/ 802.1X Authentication supported
- Support X-Roaming < 100 ms
- Support AP/Client/Bridge/AP-Client Mode
- Secured Management by HTTPs
- Event Warning by Syslog, Email, SNMP Trap
- 1KV isolation for PoE P.D. port of IAP-420+
- DIN-Rail and Wall-mount enabled
Datasheet
Product Specification
| Model | IAP-420 | IAP-420+ |
| Physical Ports | ||
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 | |
| PoE P.D. Port | - | Present at ETH Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min |
| WLAN Interface | ||
| Operating Mode | AP/Client/Bridge/AP-Client | |
| Antenna and Connector | 1 x External reverse SMA-type antenna connector | |
| Radio Frequency Type | DSSS, OFDM | |
| Modulation | IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM | |
| Frequency Band | America / FCC: 2.412~2.462 GHz (11 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels ) | |
| Transmission Rate | 802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n(40MHz): UP to 150 Mbps | |
| Transmit Power | 802.11b: 19dBm ±1.5dBm 802.11g: 17dBm ±1.5dBm 802.11n(2.4G@20MHz): 16.5dBm ±1.5dBm 802.11n(2.4G@40MHz): 14.5dBm ±1.5dBm | |
| Receiver Sensitivity | 802.11b: -90dBm ±2dBm@1Mbps 802.11g: -72dBm ±2dBm@54Mbps 802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm | |
| Encryption Security | WEP: (64-bit, 128-bit key supported) WPA/WPA2:802.11i (WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption | |
| Wireless Security | SSID broadcast disable and enable | |
| Protocol Support | ||
| Protocol | ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP | |
| LED Indicators | ||
| Power Indicator | LED x 3, PWR 1, 2, (PoE): Green On: Power is on and functioning Normally. | |
| 10/100Base-T(X) RJ45 Port Indicator | LED x 2 , Green for port Link/Act at 100Mbps. | |
| WLAN LEDs | WLAN Link /ACT: Green: Blinking | |
| Power | ||
| Redundant Input Power | Dual DC inputs. 12~48VDC on 4-pin terminal block | |
| Power Consumption (Typ.) | 4 Watts | |
| Overload Current Protection | Present | |
| Reverse Polarity Protection | Present | |
| Physical Characteristics | ||
| Enclosure | IP-30 | |
| Dimensions (W x D x H) | 41(W) x 81(D )x 95(H) mm | |
| Weight (g) | 292 g | 297 g |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | -10 to 60°C(14 to 140°F) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory Approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A | |
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-31 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1 | |