SYS-620TP-HTTR
2U 4-node TwinPro Server. 3 3.5" SATA drives per node, dual 10GbE
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
- Dual Socket P+ (LGA-4189) 3rd Generation Intel® Xeon® Scalable Processors
- Intel® C621A chipset
- 16 DIMMs, Up to 4TB 3DS ECC DDR4-3200 LRDIMM/RDIMM
- 2 PCI-E 4.0 x16 (LP), 1 PCI-E 4.0 x8 (with M.2 adapter installed for support 2 NVME up to 22x80 mm)
- Intel® X710 Dual port 10GBase-T LAN onboard
- 3x 3.5" hot-swap SATA/SAS drive bays
- 4 heavy duty 8cm PWM fans with optimal fan speed control (Per System)
- Two 2200W redundant power supplies with PMBus
- ASPEED AST2600 BMC, 2 USB, VGA. RoT, 2 SATADOM ports
SATA (6Gbps); 3 slots per node; RAID 0, 1, 5 support.
Datasheet
Product Specification
| SYS-620TP-HTTR | SuperServer SYS-620TP-HTTR |
| Motherboard | Super X12DPT-PT6 |
| Processor/Cache (per Node) | |
| CPU | Dual Socket P+ (LGA-4189)3rd Generation Intel® Xeon® Scalable processors Dual UPI up to 11.2GT/s Support CPU TDP 185W * |
| Cores | Up to 32C/64T |
| Note | *Please contact us for supporting conditions of high power (TDP 150W and above) or high base frequency (3.0 GHz and above) processors. |
| System Memory (per Node) | |
| Memory | Memory Capacity: 16 DIMM slots UP to 4TB: 16x 256 GB DRAM Memory Type: 3200/2933/2666MHz ECC DDR4 RDIMM |
| Memory Voltage | 1.2 V |
| Error Detection | ECC |
| On-Board Devices (per Node) | |
| SATA | SATA3 (6Gbps) via Intel C621A; RAID 0, 1, 5 support |
| Chipset | Intel® C621A |
| Network Connectivity | 2x 10GbE BaseT with Intel® X710-AT2 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| BMC | ASPEED AST2600 BMC |
| Input / Output (per Node) | |
| LAN | 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 3.0 port(s) (2 rear) |
| Video | 1 VGA port(s) |
| DOM | 2 Super DOM (Disk on Module) port |
| Others | M.2 2 NVME M.2 (up to 22x80 mm) support via installed SCC-P2N2M2-P2 and M.2 for OS boot only. |
| System BIOS | |
| BIOS Type | AMI 32MB SPI Flash EEPROM |
| Management | |
| Power Configurations | ACPI/APM Power ManagementACPI Power ManagementPower-on mode for AC power recovery |
| PC Health Monitoring | |
| CPU | 5 Phase-switching voltage regulator Monitors for CPU Cores, Chipset Voltages, Memory |
| FAN | Fans with tachometer monitoring Pulse Width Modulated (PWM) fan connectorsStatus monitor for speed control |
| Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors |
| Chassis | |
| Form Factor | 2U Rackmount |
| Model | CSV-827HQ+-R2K20BP2 |
| Dimensions and Weight | |
| Height | 3.47" (88mm) |
| Width | 17.25" (438mm) |
| Depth | 30.5" (774mm) |
| Package | 10" (H) x 24.5" (W) x 45" (D) |
| Weight | Net Weight: 72 lbs (32.7 kg) Gross Weight: 90 lbs (40.9 kg) |
| Available Color | Black front & sliver body |
| Front Panel | |
| Buttons | Power On/Off buttonUID button |
| LEDs | Network activity LED Power status LED System information (overheat/UID) LED |
| Expansion Slots (per Node) | |
| PCI-Express (PCI-E) | Slot 1: PCI-E 4.0 x16 LP Slot 2: PCI-E 4.0 x16 LPInternal Slot: M.2 |
| Drive Bays / Storage (per Node) | |
| Hot-swap | 3x 3.5" hot-swap SATA drive bays |
| System Cooling | |
| Fans | 4x 8cm heavy duty fans with optimal fan speed control |
| Air Shroud | 4 Air Shroud(s) |
| Power Supply | 1U 2200W Redundant, Titanium, 76(W) X 40(H) X 336(L) mm |
| Dimension (W x H x L) | 76 x 40 x 336 mm |
| AC Input | 1200W: 100-127Vac / 50-60Hz 2200W: 200-240Vac / 50-60Hz |
| +12V | Max: 100A / Min: 0A (100Vac-127Vac) Max: 183.3A / Min: 0A (200Vac-240Vac) |
| 5V SB | Max: 1A / Min: 0A |
| +54V | Max: 1A / Min: 0A |
| Output Type | Gold Finger Connector |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |